CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built Nov 2011 – Jul 2013
Versions by build date: Jun 2011 – Oct 2011 Nov 2011 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Intelligent tester only:
- Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1-trip detection logic, which is more sensitive to malfunctions than normal mode (default). Normal mode uses 2-trip detection logic.
- Clear the DTC(s) (Click here).
- Switch the ECM from normal mode to check mode using the intelligent tester (Click here).
- Perform a simulation test (Click here).
- Check and wiggle the harness(es), connector(s) and terminal(s) (Click here).