Home › ENGINE › 1TR-FE ENGINE CONTROL SYSTEM › ECM
INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
1.
INSTALL NO. 2 ECM BRACKET
Install the bracket with the 2 screws.
Torque:
3.0 N*m{
31 kgf*cm
, 27 in.*lbf
}
2.
INSTALL NO. 1 ECM BRACKET
Install the bracket with the 2 screws.
Torque:
3.0 N*m{
31 kgf*cm
, 27 in.*lbf
}
3.
INSTALL ECM
Install the ECM with the bolt and 2 nuts.
Torque:
12.5 N*m{
127 kgf*cm
, 9 ft.*lbf
}
Connect the 4 connectors.
4.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Attach the 2 hinges to install the glove compartment door.
Text in Illustration
*1
Hinge
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
Text in Illustration
*1
Stopper
5.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6.
PERFORM INITIALIZATION
Perform initialization (Click here ).
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.