2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

B278058E01
  1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    Text in Illustration 
    *1
    Stopper

  1. B278059E01
    Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
    Text in Illustration 
    *1
    Hinge


3. REMOVE 4WD CONTROL ECU (for 4WD)

  1. A111680
    Disconnect the connector.

  1. Remove the bolt and 4WD control ECU.


4. REMOVE ECM

  1. A111681
    Disconnect the 4 connectors.

  1. Remove the bolt, 2 nuts and ECM.


5. REMOVE NO. 1 ECM BRACKET

  1. G039685E01
    Remove the 2 screws and bracket.


6. REMOVE NO. 2 ECM BRACKET

  1. G039686E01
    Remove the 2 screws and bracket.

← COMPONENTS (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →