REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
|
 |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
Text in IllustrationÂ
*1
|
Stopper
|
- Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
Text in IllustrationÂ
*1
|
Hinge
|
| 3.
REMOVE ECM |
 |
- Disconnect the 4 connectors.
Remove the bolt, 2 nuts and ECM.
| 4.
REMOVE NO. 1 ECM BRACKET |
 |
- Remove the 2 screws and bracket.
| 5.
REMOVE NO. 2 ECM BRACKET |
 |
- Remove the 2 screws and bracket.