INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL MASS AIR FLOW METER |
Install a new O-ring to the MAF meter.

Install the MAF meter with the 2 screws.
Connect the MAF meter connector.
| 2. INSTALL V-BANK COVER |
- Torque:
- 7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. PERFORM INITIALIZATION |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
