2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

  1. A107631E01
    Partially insert the sensor into the water and warm up the water.

  1. Measure the resistance between the terminals.

    Standard resistance:
    Condition
    Specified Condition
    Approx. 20°C (68°F)
    2.32 to 2.59 kΩ
    Approx. 80°C (176°F)
    0.310 to 0.326 kΩ

    If the result is not as specified, replace the sensor.

    NOTICE:
    When checking the ECT sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →