INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL ACCELERATOR PEDAL ROD |
- NOTICE:
- Avoid excessive force to the accelerator pedal sensor.
- Do not disassemble the accelerator pedal sensor assembly.
- This accelerator pedal does not require lubrication.
Do not apply oil other lubrication to the accelerator pedal sensor assembly.
If applied, the accelerator pedal rod assembly must be replaced.
- Avoid excessive force to the accelerator pedal sensor.
Install the accelerator pedal rod with the 2 bolts.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Connect the accelerator pedal position sensor connector.
