2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT CAMSHAFT POSITION SENSOR

  1. A112974E01
    Measure the resistance between terminals 1 and 2.

    Standard resistance:
    Temperature
    Specified Condition
    Cold
    835 to 1,400 Ω
    Hot
    1,060 to 1,645 Ω

    NOTICE:
    In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

    If the resistance is not as specified, replace the sensor.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →