2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL FUEL FILTER

  1. G038575E01
    Install the fuel filter with the 3 nuts.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }


2. CONNECT FUEL MAIN TUBE

NOTICE:
Before installing the fuel main tube's connector to the fuel filter's lower pipe, check the connector for damage and foreign matter.

  1. Connect the connector to the lower pipe. Push the two parts together firmly until a "click" sound is heard.

  1. Check that the connector and lower pipe are securely connected by trying to pull them apart.

  1. Connect the hose to the clamp.


3. CONNECT FUEL HOSE

NOTICE:
Before installing the fuel hose's connector to the fuel filter's upper pipe, check the connector for damage and foreign matter.

  1. Connect the connector to the upper pipe. Push the two parts together firmly until a "click" sound is heard. Then attach the lock claws to the connector by pushing down on the connector cover.

  1. Check that the connector and upper pipe are securely connected by trying to pull them apart.

  1. Install the fuel tube grommet.


4. INSTALL CHARCOAL CANISTER

  1. A112080
    Attach the canister to the stay.

  1. A112078
    Connect the 3 hoses to the canister.


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.


7. CHECK FOR FUEL LEAKS
  1. Connect the intelligent tester to the DLC3.

    1. Turn the ignition switch ON.

      NOTICE:
      Do not start the engine.

    2. Push the intelligent tester main switch ON.

    3. Select the Active Test and enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.

  1. Check for fuel leaks.

    1. Check that there are no fuel leaks after performing maintenance anywhere on the fuel system.

← REMOVAL (from Jun 2011)INSTALLATION (Aug 2012 – Jul 2013) →