2014 Hilux · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT DRIVE BELT

  1. A058797E02
    Check the belt for wear, cracks or other signs of damage.
    If any of the following defects is found, replace the drive belt.
    1. The belt is cracked.
    2. The belt is worn out to the extent that the cords are exposed.
    3. The belt has chunks missing from the ribs.

  1. A087787E04
    Check that the belt fits properly in the ribbed groves.

    HINT:
    Check with your hand to confirm that the belt has not slipped out of the groove on the bottom to the pulley. If it has slipped out, replace the drive belt. Install a new drive belt correctly.

  1. G038478E02
    Check that the tensioner indicator mark is within range A shown in the illustration.
    If the mark is not within range A, replace the drive belt.

← COMPONENTS (from Aug 2012)REMOVAL (Jun 2011 – Jul 2012) →