REMOVAL
Removal / installation · Vehicles built from Jun 2011
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. REMOVE REAR SEAT CUSHION ASSEMBLY LH (w/ Seat Cushion) |
Operate the rear seat cushion lock hook release lever and pull up the rear seat cushion assembly LH to detach the hook.

Text in Illustration 

Pull Up


Release
Detach the 2 hooks and rear seat cushion assembly LH.

| 2. REMOVE REAR SEAT CUSHION ASSEMBLY RH (w/ Seat Cushion) |
- HINT:
- Use the same procedures described for the LH side.
| 3. REMOVE UPPER BACK PANEL GARNISH |
![]() ![]() |
Detach the 4 claws and 5 clips and remove the upper back panel garnish.
| 4. REMOVE REAR SEATBACK ASSEMBLY |
Remove the 2 bolts.

Lift up the rear seatback assembly in the direction indicated by the arrow to detach the 2 hooks from the vehicle body. Then remove the rear seatback assembly.
- NOTICE:
- Be careful not to damage the vehicle body.

