2014 Hilux · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2013 from Aug 2013

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.


1. REMOVE REAR SEAT HINGE COVER LH

B276874
  1. Pull the rear seat hinge cover LH to detach the 2 claws.

    Text in Illustration 
    V100135
    Pull
    V100136
    Pull Up

  1. Pull up the rear seat hinge cover LH to detach the guide and remove the rear seat hinge cover LH.


2. REMOVE REAR SEAT HINGE COVER RH

HINT:
Use the same procedures described for the LH side.


3. REMOVE REAR SEAT ASSEMBLY

  1. except 3 Point Type Rear Center Seat Belt:

    1. B276876E01
      Detach the fold seat stopper band button and pull the fold seat stopper band to release the seat cushion lock.
      Text in Illustration 
      *1
      Fold Seat Stopper Band Button
      *2
      Seat Cushion Rubber Band

    2. Pull the 2 rear No. 1 seat inner belts through the 2 seat cushion rubber bands.

    3. Fold up the rear seat cushion assembly.

    4. Attach the fold seat stopper band to the vehicle body and temporarily fix the rear seat cushion assembly in place.

    5. B276879E01
      Remove the 4 bolts.

    6. Detach the fold seat stopper band from the vehicle body.

    7. Lift up the seat in the direction indicated by the arrow to detach the 2 hooks and 2 guides. Then remove the rear seat assembly.

      Text in Illustration 
      *1
      Hook
      *2
      Guide

      NOTICE:
      Be careful not to damage the vehicle body.

  1. for 3 Point Type Rear Center Seat Belt:

    1. B360153E01
      Detach the fold seat stopper band button and pull the fold seat stopper band to release the seat cushion lock.
      Text in Illustration 
      *1
      Fold Seat Stopper Band Button
      *2
      Seat Cushion Rubber Band

    2. Pull the rear No. 1 seat inner belt RH through the seat cushion rubber band.

    3. Fold up the rear seat cushion assembly.

    4. B360146
      Remove the bolt and disconnect the rear No. 1 seat inner belt assembly LH.

    5. Return the rear seat cushion assembly to its original position.

    6. B360162E01
      Pull the rear No. 1 seat inner belt assembly LH through the seat cushion rubber band.
      Text in Illustration 
      *1
      Seat Cushion Rubber Band

    7. Fold up the rear seat cushion assembly.

    8. Attach the fold seat stopper band to the vehicle body and temporarily fix the rear seat cushion assembly in place.

    9. B360143E01
      Remove the 4 bolts.

    10. Detach the fold seat stopper band from the vehicle body.

    11. Lift up the seat in the direction indicated by the arrow to detach the 2 hooks and 2 guides. Then remove the rear seat assembly.

      Text in Illustration 
      *1
      Hook
      *2
      Guide

      NOTICE:
      Be careful not to damage the vehicle body.

← REMOVAL (Jun 2011 – Jul 2013)DISASSEMBLY (from Jun 2011) →