2014 Hilux · Service Manual ENGINE

BASIC INSPECTION

Troubleshooting · Vehicles built from Jun 2011

When a malfunction is not confirmed in the DTC check, perform troubleshooting on all circuits considered possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. This check is essential when troubleshooting the engine.

1.CHECK BATTERY VOLTAGE

    NOTICE:
    Perform the battery check with the engine stopped and ignition switch OFF.

    Result:
    Result
    Proceed to
    11 V or more
    OK
    Below 11 V
    NG


NG.
OK

2.CHECK IF ENGINE CRANKS

    NG.
    OK

    3.CHECK IF ENGINE STARTS

      NG.
      OK

      4.CHECK AIR FILTER
      1. Perform a visual check and make sure that the air filter is not contaminated with dirt or oil.


      NG.
      OK

      5.CHECK IDLING SPEED

        NG.
        OK

        6.CHECK FUEL PRESSURE
        1. Check the fuel pressure (Click here).


        NG.
        OK

        7.CHECK FOR SPARK
        1. Check for spark (Click here).


        NG.
        OK

        ← CHECK FOR INTERMITTENT PROBLEMS (from Aug 2013)PROBLEM SYMPTOMS TABLE (Jun 2011 – Jul 2012) →