CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Intelligent tester:
- Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which has a higher sensitivity to malfunctions than normal mode (default), which uses 2 trip detection logic.
- Clear the DTCs (Click here).
- Change the ECM from normal mode to check mode using the intelligent tester (Click here).
- Perform a simulation test (Click here).
- Check the connectors and terminals (Click here).
- Wiggle the harnesses and connectors (Click here).