Circuit diagnosis · Vehicles built Jun 2011 – Jul 2013
Versions by build date: Jun 2011 – Jul 2013from Aug 2013
DESCRIPTION
The MIL is used to inform the user when the ECM has detected a vehicle malfunction. By turning the ignition switch ON, power is supplied to the MIL circuit, and the ECM provides the circuit ground that illuminates the MIL. Operation of the MIL should be checked visually: When the ignition switch is first turned ON, the MIL should illuminate. When the engine is started, the MIL should turn off.
WIRING DIAGRAM
INSPECTION PROCEDURE
1. CHECK THAT MIL IS ILLUMINATED
Perform troubleshooting in accordance with the chart below.