Cassette Tape cannot be Ejected
Circuit diagnosis · Vehicles built Jun 2011 – Oct 2011
Versions by build date: Jun 2011 – Oct 2011 Nov 2011 – Jul 2012 Aug 2012 – Jul 2013
INSPECTION PROCEDURE
| 1. PRESS ''EJECT'' AND CHECK OPERATION |
 |
Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
- OK:
- Cassette tape is ejected.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| 2. CHECK CASSETTE TAPE |
 |
Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
- OK:
- No problems with cassette tape.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK |
 |
Replace the cassette tape with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
|