Be sure to read the precautionary notices concerning the SRS airbag system before servicing (Click here).
1.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
Attach the 12 claws to install the airbag.
Attach the clamp to the bracket.
Tighten the 2 bolts.
Torque:
20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
Connect the connector to the airbag.
NOTICE:
When handling the airbag connector, do not damage the airbag wire harness.
2.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Attach the 2 hinges to install the glove compartment door.
Text in Illustration
*1
Hinge
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.