CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Intelligent Tester only:
- Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.
- Clear the DTCs (Click here).
- Check the ECM from normal mode to check mode using the intelligent tester (Click here).
- Perform a simulation test.
- Check the connectors and terminals.
- Wiggle the harnesses and connectors.
- Clear the DTCs (Click here).