After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
3.
REMOVE RADIATOR GRILLE
Put protective tape around the radiator grille.
Text in Illustration
*1
Protective Tape
Remove the 2 clips and 2 screws.
Detach the 6 claws and remove the radiator grille.
4.
REMOVE BATTERY CLAMP SUB-ASSEMBLY
Remove the bolt and battery clamp sub-assembly.
5.
REMOVE BATTERY
Disconnect the cable from the positive (+) battery terminal.