ADJUSTMENT
Removal / installation · Vehicles built from Jun 2011
| 1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
Remove the 2 bolts and heat insulator.

Loosen the park/neutral position switch bolt and move the shift lever to N.

Align the switch groove with the neutral basic line.
Hold the switch in position and tighten the bolt.
- Torque:
- 13 N*m{ 130 kgf*cm , 9 ft.*lbf }
After adjustment, perform the inspection (Click here).
Install the heat insulator with the 2 bolts.
- Torque:
- 7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
