INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Shift Lever Position
Specified Condition
4 (B) - 5 (L)
Shift lever in P or N
Below 1 Ω
4 (B) - 5 (L)
Shift lever not in P or N
10 kΩ or higher
1 (RL) - 2 (RB)
Shift lever in R
Below 1 Ω
1 (RL) - 2 (RB)
Shift lever not in R
10 kΩ or higher
2 (RB) - 7 (DL)
Shift lever in D
Below 1 Ω
2 (RB) - 7 (DL)
Shift lever not in D
10 kΩ or higher
2 (RB) - 3 (2L)
Shift lever in 2
Below 1 Ω
2 (RB) - 3 (2L)
Shift lever not in 2
10 kΩ or higher
2 (RB) - 8 (LL)
Shift lever in L
Below 1 Ω
2 (RB) - 8 (LL)
Shift lever not in L
10 kΩ or higher


