2014 Hilux · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. C240769
    Remove the 2 bolts and heat insulator.

  1. Disconnect the switch connector.

  1. G034253E01
    Using a screwdriver, bend the tabs of the lock washer.

  1. Remove the nut and lock washer.

  1. Remove the bolt and park/neutral position switch.

    HINT:
    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.

← ON-VEHICLE INSPECTION (from Jun 2011)INSPECTION (from Jun 2011) →