2014 Hilux · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT AUTOMATIC TRANSMISSION FLUID TEMPERATURE SENSOR

G022837E01
  1. Measure the resistance of the temperature sensor.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    79 Ω to 156 kΩ
    1 - Body ground
    Always
    10 kΩ or higher
    2 - Body ground
    Always
    10 kΩ or higher

    HINT:
    If the resistance is out of the specified range at either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

    Standard Resistance:
    ATF Temperature
    Specified Condition
    20°C (68°F)
    10.3 to 13.9 kΩ
    120°C (248°F)
    0.58 to 0.65 kΩ

← REMOVAL (from Jun 2011)INSTALLATION (from Jun 2011) →