REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() ![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
![]() ![]() |
Detach the 4 claws and remove the parking brake hole cover.
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Detach the 12 claws and remove the upper console panel.
- NOTICE:
- Be careful not to damage the instrument panel and console box with the claws of the upper console panel.


Text in Illustration *A
for 2WD
*B
for 4WD
| 4. REMOVE CONSOLE BOX ASSEMBLY |
![]() ![]() |
Remove the 4 screws and 2 bolts.
Using a clip remover, remove the 2 clips and console box.
Text in Illustration *1
Screw
*2
Bolt
*3
Clip
| 5. REMOVE FLOOR SHIFT ASSEMBLY |
![]() ![]() |
Disconnect the 2 connectors and detach the clamp.
Move the shift lever to L.
Disconnect the transmission control cable.
Remove the 4 bolts.

Remove the floor shift.




