INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
| 1.
INSTALL CLUTCH ACCUMULATOR ASSEMBLY |
 |
Install the clutch accumulator with the 2 nuts.
-
Torque:
- 18 N*m{
184 kgf*cm
, 13 ft.*lbf
}
Using a union nut wrench, connect the 2 flexible tubes.
-
Torque:
- 15 N*m{
153 kgf*cm
, 11 ft.*lbf
}
- NOTICE:
- Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).
| 2.
BLEED AIR FROM CLUTCH PIPE LINE |
 |
(Click here)
| 3.
CHECK FOR CLUTCH FLUID LEAKAGE |
|
| 4.
CHECK FOR FLUID LEVEL IN RESERVOIR
|
 |
- Fluid:
Made
|
Fluid
|
for TSAM Made
|
SAE J1704 or FMVSS No. 116 DOT 4
|
except TSAM Made
|
SAE J1703 or FMVSS No. 116 DOT 3
|