INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL SIDE TURN SIGNAL LIGHT BULB |
![]() ![]() |
Install the bulb to the socket.
Turn the bulb/socket unit in the direction indicated by the arrow to install it.
| 2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY |
![]() ![]() |
Connect the connector and install the side turn signal light.
Attach the side turn signal light with the 2 claws and install the light as shown in the illustration.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. PERFORM INITIALIZATION |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.



