REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE TAIL GATE SERVICE HOLE COVER |
for A Deck:

Remove the 10 screws and tail gate service hole cover.
for J Deck:
Remove the 8 screws and tail gate service hole cover.
Text in Illustration *A
for A Deck
*B
for J Deck
| 3. REMOVE CENTER STOP LIGHT ASSEMBLY |
![]() ![]() |
Disconnect the connector.
Detach the 4 claws and remove the light.

