REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE STEERING COLUMN UPPER COVER
|
 |
Remove the 3 screws and cover lower.
| 3.
REMOVE STEERING COLUMN LOWER COVER
|
 |
Remove the 3 screws and cover lower.
| 4.
REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY |
 |
- Disconnect the connectors.
Detach the claw and remove the windshield wiper switch.
- NOTICE:
- Do not push the claw with excessive force as damage may occur.