2014 Hilux · Service Manual BODY ELECTRICAL

REPLACEMENT

Removal / installation · Vehicles built from Jun 2011


1. REMOVE FRONT WIPER BLADE

  1. B113197
    Detach the claw as shown in the illustration.

  1. B113199
    Remove the front wiper blade as shown in the illustration.

    NOTICE:
    Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.


2. REMOVE WIPER RUBBER

  1. E226558
    Detach the head part (large side) of the wiper rubber from the wiper blade.

  1. B108991E03
    Remove the wiper rubber in the direction indicated by the arrow in the illustration.
    Text in Illustration 
    *a
    Head Part (Large Side)

    NOTICE:
    Do not pull out the wiper rubber forcibly. Doing so will deform the backing plates or damage the blade claw.

  1. Remove the 2 wiper rubber backing plates from the wiper rubber.


3. INSTALL WIPER RUBBER

  1. E178054E02
    Install the 2 backing plates to the rubber.
    Text in Illustration 
    *1
    Backing Plate
    *a
    Curved

    NOTICE:
    Install the backing plates facing the proper direction.

  1. B108990E03
    Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.
    Text in Illustration 
    *a
    Head Part (Large Side)

    HINT:
    Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle.

  1. E226560
    Attach the head part (large side) of the rear wiper rubber to the claw on the end of the wiper blade.

    NOTICE:
    Push the wiper blade into the grooves of the wiper rubber to attach the wiper rubber completely.


4. INSTALL FRONT WIPER BLADE

  1. B113198
    Attach the claw to install the front wiper blade.

← COMPONENTS (from Jun 2011)COMPONENTS (from Jun 2011) →