2014 Hilux · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Aug 2012

Versions by build date: Jun 2011 – Jul 2012 from Aug 2012


1. INSTALL COUNTER GEAR FRONT BEARING

D026124E01
  1. Using SST and a press, press in the front bearing to the counter gear.

    SST
    09515-10010  

    NOTICE:
    Install it so that the snap ring groove of the bearing faces to the front side.


2. INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING
  1. Select a snap ring that makes the clearance between the counter gear and snap ring to be within the specification.

    Standard clearance:
    0.10 mm (0.0039 in.) or less

    Thickness
    2.05 to 2.10 mm (0.0807 to 0.0827 in.)
    2.10 to 2.15 mm (0.0827 to 0.0846 in.)
    2.15 to 2.20 mm (0.0846 to 0.0866 in.)
    2.20 to 2.25 mm (0.0866 to 0.0886 in.)
    2.25 to 2.30 mm (0.0886 to 0.0906 in.)
    2.30 to 2.35 mm (0.0906 to 0.0925 in.)

  1. D026119E02
    Using a snap ring expander, install the snap ring.

← INSTALLATION (Jun 2011 – Jul 2012)PROBLEM SYMPTOMS TABLE (from Jun 2011) →