REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE NO. 2 COUNTER GEAR FRONT BEARING SNAP RING |
![]() ![]() |
Using a snap ring expander, remove the snap ring from the counter gear.
| 2. REMOVE COUNTER GEAR FRONT BEARING |
![]() ![]() |
Using SST and a press, press out the front bearing from the counter gear.
- SST
- 09950-00020
09950-60010 (09951-00220)
09950-70010 (09951-07100)
| 3. INSPECT COUNTER GEAR |
![]() ![]() |
Using a micrometer, measure the outside diameter of the counter gear as shown in the illustration.
- Standard outside diameter:
- 29.984 to 30.000 mm (1.1805 to 1.1811 in.)
- Minimum outside diameter:
- 29.984 mm (1.1805 in.)




