2014 Hilux · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2013 from Aug 2013


METER GAUGE AND WARNING/INDICATOR LIGHT (for 1TR-FE)
*1: w/ Tachometer
*2: w/ Seat Belt Warning System
*3: w/ ABS
*4: w/ Airbag System
*5: w/ Front Fog Light
*6: w/ Rear Fog Light
*7: w/ Vehicle Speed Reminder
*8: w/ Key Reminder Warning System
*9: w/ Light Reminder Warning System
Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer*1
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM
Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy switch signal
SEAT BELT*2
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON
ABS*3
Illuminates when receiving malfunction signal from skid control ECU with actuator
SRS*4
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
FR FOG*5
Illuminates when receiving fog light switch signal
SPEED ALARM*7
Illuminates when vehicle speed 120 km/h (74 mph) or more
RR FOG*6
Illuminates when receiving rear fog light switch signal
Buzzer 
Item
Signal Description
Vehicle Speed Reminder*7
Buzzer is ON when vehicle speed is 120 km/h (74 mph) or more
Key Reminder*8
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder*9
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD and driver side door is open

METER GAUGE AND WARNING/INDICATOR LIGHT (for 2TR-FE)
*1: w/ Tachometer
*2: w/ Seat Belt Warning System
*3: w/ ABS
*4: w/ Airbag System
*5: for 4WD
*6: for Automatic Transmission
*7: w/ Front Fog Light
*8: w/ Vehicle Speed Reminder
*9: w/ Rear Fog Light
*10: w/ Rear Differential Lock System
*11: for Optitron Meter
*12: w/ Key Reminder Warning System
*13: w/ Light Reminder Warning System
Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer*1
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM
Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT*2
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON
ABS*3
Illuminates when receiving malfunction signal from skid control ECU with actuator
SRS*4
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
4WD*5
Illuminates when changing drivetrain from 2WD to 4WD
A/T OIL TEMP*5, *6
Illuminates when receiving ATF temperature is too high signal from ECM
A/T P*5, *6
Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal
FR FOG*7
Illuminates when receiving fog light switch signal
SPEED ALARM*8
Illuminates when vehicle speed 120 km/h (74 mph) or more
RR FOG*9
Illuminates when receiving rear fog light switch signal
REAR DIFFERENTIAL LOCK*10
Illuminates when receiving rear differential lock signal from the rear differential lock detection switch
TAIL*11
Illuminates when light control switch is set to TAIL or HEAD
P*6
Illuminates when receiving P signal from park / neutral position switch
R*6
Illuminates when receiving R signal from park / neutral position switch
N*6
Illuminates when receiving N signal from park / neutral position switch
D*6
Illuminates when receiving D signal from shift lock control ECU
3*6
Illuminates when receiving 3 signal from shift lock control ECU
2*6
Illuminates when receiving 2 signal from park / neutral position switch
L*6
Illuminates when receiving L signal from park / neutral position switch
Buzzer 
Item
Signal Description
Vehicle Speed Reminder*8
When vehicle speed is 120 km/h (74 mph) or more, buzzer sounds
Key Reminder*12
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder*13
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open

METER GAUGE AND WARNING/INDICATOR LIGHT (for 1GR-FE)
*1: w/ ABS
*2: for 4WD
*3: for Automatic Transmission
*4: for Optitron Meter
*5: w/ Cruise Control System
*6: w/ Front Fog Light
*7: w/ Rear Differential Lock System
*8: w/ VSC
*9: w/ Key Reminder Warning System
*10: w/ Seat Belt Reminder
Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM
Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON
ABS*1
Illuminates when receiving malfunction signal from skid control ECU with actuator
SRS
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
4WD*2
Illuminates when changing drivetrain from 2WD to 4WD
A/T OIL TEMP*2, *3
Illuminates when receiving ATF temperature is too high signal from ECM
P*3
Illuminates when receiving P signal from park / neutral position switch
R*3
Illuminates when receiving R signal from park / neutral position switch
N*3
Illuminates when receiving N signal from park / neutral position switch
D*3
Illuminates when receiving D signal from shift lock control ECU
4*3
Illuminates when receiving 4 signal from shift lock control ECU
3*3
Illuminates when receiving 3 signal from shift lock control ECU
2*3
Illuminates when receiving 2 signal from park / neutral position switch
L*3
Illuminates when receiving L signal from park / neutral position switch
A/T P*2, *3
Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal
TAIL*4
Illuminates when light control switch is set to TAIL or HEAD
CRUISE*5
Illuminates when receiving cruise control system is operating properly signal from ECM
FR FOG*6
Illuminates when receiving fog light switch signal
REAR DIFFERENTIAL LOCK*7
Illuminates when receiving rear differential lock signal from the rear differential lock detection switch
VSC OFF*8
Illuminates when receiving VSC OFF signal from skid control ECU with actuator
SLIP*8
Illuminates when receiving SLIP signal from skid control ECU with actuator
TRC OFF*8
Illuminates when receiving TRC OFF signal from skid control ECU with actuator
Buzzer 
Item
Signal Description
Key Reminder*9
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open
Seat Belt Reminder*10
Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt or front passenger side seat belt is unfastened

METER GAUGE AND WARNING/INDICATOR LIGHT (for 1KD-FTV)
*1: w/ ABS
*2: for 4WD
*3: for Automatic Transmission
*4: for Optitron Meter
*5: for A750F
*6: Except A750F
*7: w/ Cruise Control System
*8: w/ Front Fog Light
*9: w/ Rear Fog Light
*10: w/ Rear Differential Lock System
*11: w/ Oil Level Indicator Light
*12: w/ Oil maintenance Indicator Light
*13: w/ VSC
*14: w/ Key Reminder Warning System
*15: w/ Seat Belt Reminder
*16: for DPF
Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM
Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON
ABS*1
Illuminates when receiving malfunction signal from skid control ECU with actuator
GLOW
Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM
FUEL FILTER SEDIMENTER
Illuminates when receiving fuel filter switch signal or fuel sedimenter switch
SRS
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
T-BELT
Illuminates when odometer's display is 150000 km/h
4WD*2
Illuminates when changing drivetrain from 2WD to 4WD
A/T OIL TEMP*2, *3
Illuminates when receiving ATF temperature is too high signal from ECM
P*3
Illuminates when receiving P signal from park / neutral position switch
R*3
Illuminates when receiving R signal from park / neutral position switch
N*3
Illuminates when receiving N signal from park / neutral position switch
D*3
Illuminates when receiving D signal from shift lock control ECU
4*3, *5
Illuminates when receiving 4 signal from shift control ECU
3*3
  1. Illuminates when receiving 2 signal from park / neutral position switch*5
  2. Illuminates when receiving 3 signal from shift lock control ECU*6
2*4
  1. Illuminates when receiving 2 signal from shift lock control ECU*5
  2. Illuminates when receiving 2 signal from park / neutral position switch*6
L*3
  1. Illuminates when receiving L signal from shift lock control ECU*5
  2. Illuminates when receiving L signal from park / neutral position switch*6
A/T P*2, *3
Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal
CRUISE*7
Illuminates when receiving cruise control system is operating properly signal from ECM
TAIL*4
Illuminates when light control switch is set to TAIL or HEAD
FR FOG*8
Illuminates when receiving fog light switch signal
RR FOG*9
Illuminates when receiving rear fog light switch signal
REAR DIFFERENTIAL LOCK*10
Illuminates when receiving rear differential lock signal from the rear differential lock detection switch
OIL LEVEL*11
Illuminates when receiving amount of engine oil is not sufficient signal for engine oil level sensor
OIL MAINTENANCE*12
Illuminates when the receiving oil maintenance signal from ECM
VSC OFF*13
Illuminates when receiving VSC OFF signal from skid control ECU with actuator
SLIP*13
Illuminates when receiving malfunction signal from skid control ECU with actuator
DPF*16
Illuminates when the receiving DPF signal from ECM
TRC OFF*13
Illuminates when receiving TRC OFF signal from skid control ECU with actuator
Buzzer 
Item
Signal Description
Key Reminder*14
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open
Seat Belt Reminder*15
Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt or front passenger side seat belt is unfastened

METER GAUGE AND WARNING/INDICATOR LIGHT (for 2KD-FTV)
*1: w/ Seat Belt Warning System
*2: w/ ABS
*3: w/ Airbag System
*4: w/ Front Fog Light
*5: w/ Rear Fog Light
*6: w/ Rear Differential Lock System
*7: w/ Oil Level Indicator Light
*8: w/ Oil Maintenance Indicator Light
*9: w/ Vehicle Speed Reminder
*10: w/ Key Reminder Warning System
*11: for 4WD
*12: w/ Cruise Control System
*13: for DPF
*14: w/ VSC
*15: for Optitron Meter
*16: w/ Light Reminder Warning System
Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM
Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT*1
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON
ABS*2
Illuminates when receiving malfunction signal from skid control ECU with actuator
GLOW
Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM
FUEL FILTER SEDIMENTER
Illuminates when receiving fuel filter switch signal or fuel sedimenter switch
SRS*3
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
T-BELT
Illuminates when odometer's display is 150000 km/h
FR FOG*4
Illuminates when receiving front fog light switch signal
RR FOG*5
Illuminates when receiving rear fog light switch signal
REAR DIFFERENTIAL LOCK*6
Illuminates when receiving rear differential lock signal from the rear differential lock detection switch
OIL LEVEL*7
Illuminates when receiving amount of engine oil is not sufficient signal for engine oil level sensor
OIL MAINTENANCE*8
Illuminates when the receiving oil maintenance signal from ECM
SPEED ALARM*9
Illuminates when vehicle speed 120 km/h (74 mph) or more
DPF*13
Illuminates when the receiving DPF signal from ECM
VSC OFF*14
Illuminates when receiving VSC OFF signal from skid control ECU with actuator
SLIP*14
Illuminates when receiving malfunction signal from skid control ECU with actuator
TAIL*15
Illuminates when light control switch is set to TAIL or HEAD
4WD*11
Illuminates when changing drivetrain from 2WD to 4WD
CRUISE*12
Illuminates when receiving cruise control system is operating properly signal from ECM
TRC OFF*14
Illuminates when receiving TRC OFF signal from skid control ECU with actuator
Buzzer 
Item
Signal Description
Vehicle Speed Reminder*9
When vehicle speed is 120 km/h (74 mph) or more, buzzer sounds
Key Reminder*10
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder*16
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open

METER GAUGE AND WARNING/INDICATOR LIGHT (for 5L-E)
*1: w/ Seat Belt Warning System
*2: w/ ABS
*3: w/ Airbag System
*4: w/ Rear Differential Lock System
*5: w/ Front Fog Light
*6: for 4WD
Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM
Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT*1
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON
ABS*2
Illuminates when receiving malfunction signal from skid control ECU with actuator
GLOW
Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM
FUEL FILTER SEDIMENTER
Illuminates when receiving fuel filter switch signal or fuel sedimenter switch
SRS*3
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
T-BELT
Illuminates when odometer's display is 150000 km/h
REAR DIFFERENTIAL LOCK*4
Illuminates when receiving rear differential lock signal from the rear differential lock detection switch
FR FOG*5
Illuminates when receiving front fog light switch signal
4WD*6
Illuminates when changing drivetrain from 2WD to 4WD

COMBINATION METER HAS FOLLOWING FEATURES
  1. Built-in buzzer for the reminder system (light*1, key*2, seat belt*3 and vehicle speed*4)

    1. The warning buzzer sounds when: 1) a key is in the ignition key cylinder, the ignition switch is off and the driver side door is open*1; 2) the light control switch is set to TAIL or HEAD, the ignition switch is off and the driver side door is open*2; 3) the vehicle speed 15 (9 mph) or more and the driver side seat belt or front passenger side seat belt is unfastened*3, *5; 4) the ignition switch is ON and the driver side seat belt or front passenger side seat belt is unfastened*3, *6; or 5) the vehicle speed 120 km/h (74 mph) or more.

  2. Odometer and trip meter knob

    1. Press and release the knob to scroll through trip "A", trip "B" and odometer figures.
    1. Press and hold the knob to reset the trip meter.

  3. Multi-display*7

    1. The multi-display provides the following information: 1) outside temperature*8; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) compass; and 7) elapsed time since the ignition switch was turned ON.
    1. Press INFO to change the display item.
    1. Press RESET to clear the stored data.
    1. Press H to adjust the hour of the clock.
    1. Press M to adjust the minutes of the clock.
    1. Press 00 to set the minutes to 00.
    *1: w/ Light Reminder Warning System
    *2: w/ Key Reminder Warning System
    *3: w/ Seat Belt Reminder
    *4: w/ Vehicle Speed Reminder
    *5: for Australia and Europe
    *6: for Middle East
    *7: w/ Multi-display
    *8: for Automatic Air Conditioning System

← SYSTEM DESCRIPTION (Jun 2011 – Jul 2013)HOW TO PROCEED WITH TROUBLESHOOTING (Jun 2011 – Jul 2012) →