2014 Hilux · Service Manual SUSPENSION & AXLE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE REAR LEAF SPRING PIN BUSH
  1. Using a screwdriver, remove the 2 bushes from the bracket pin side or spring.


2. REMOVE REAR LEAF SPRING SHACKLE LOWER BUSH
  1. Using a screwdriver, remove the 2 bushes from the spring shackle side or spring.


3. REMOVE REAR LEAF SPRING SHACKLE UPPER BUSH
  1. Using a screwdriver, remove the 2 bushes from the spring shackle side or spring.


4. DISASSEMBLE REAR SPRING ASSEMBLY

  1. C236367
    Secure the rear leaf spring assembly in a vise between aluminum plates.

  1. Using a brass bar and hammer, pry open the 4 spring clips of the rear No. 3 leaf spring.

    NOTICE:
    Do not damage the leaf spring.

  1. C236368
    Secure the spring with a vise as shown in the illustration.

  1. Remove the nut and center bolt.

  1. for TMT Made Extra Cab:
    Remove the 2 rear No. 3 spring spacers.

  1. for TMT Made Double Cab:
    Remove the rear No. 3 spring spacer.

  1. for TSAM Made:
    Remove the 3 rear No. 3 spring spacers.

  1. Remove the No. 1 spring spacer.


5. REMOVE REAR SPRING SILENCER
  1. Remove the 4 rear spring silencers from the leaf spring.


6. REMOVE REAR SPRING LEAF BUSH (except TMT Made Single Cab)

  1. C236361E01
    Using SST and a press, remove the rear spring leaf bush from the rear No. 1 leaf spring.
    SST
    09631-12090  
    09632-36010  

← REMOVAL (from Jun 2011)INSPECTION (from Jun 2011) →