INSTALLATION
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER LH (for Double Cab) |
![]() ![]() |
Install the seat belt with the bolt as shown in the illustration.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
| 2. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER RH (for Double Cab) |
![]() ![]() |
Install the inner seat belt with the bolt as shown in the illustration.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
| 3. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER (for Extra Cab) |
![]() ![]() |
Install the inner seat belt with the bolt as shown in the illustration.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
| 4. INSTALL REAR SEAT ASSEMBLY (for Double Cab) |
Fold up the rear seat cushion assembly.
Place the rear seat assembly in the cabin.

- NOTICE:
- Be careful not to damage the vehicle body.
Attach the 2 hooks and 2 guides.
Text in Illustration *1
Hook
*2
Guide
Attach the fold seat stopper band to the vehicle body and temporarily fix the rear seat cushion assembly in place.
Temporarily install the rear seat assembly with the 4 bolts.
Tighten the 4 bolts in the order shown in the illustration.
- Torque:
- 20 N*m{ 199 kgf*cm , 14 ft.*lbf }
Pass the 2 rear No. 1 seat inner belts through the 2 seat cushion rubber bands.

Text in Illustration *1
Seat Cushion Rubber Band
Return the seat cushion to its original position to lock the seat cushion lock.

Attach the fold seat stopper band button.
Text in Illustration *1
Fold Seat Stopper Band Button



