INSTALLATION
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
Install the blower motor with fan sub-assembly with the 3 screws.
w/o PTC Heater:
Connect the 2 connectors and attach the 2 clamps and wire harness.
w/ PTC Heater:
Connect the 4 connectors and attach the 3 clamps and wire harness.
