HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- *: Use the intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
| |||||
| 3.CONNECT INTELLIGENT TESTER TO DLC3 |
- HINT:
- If the display indicates a communication fault with the tester, inspect the DLC3.
| |||||
| 4.CHECK DTC AND FREEZE FRAME DATA* |
Check for DTCs (Click here) and freeze frame data (Click here).
- HINT:
- Record or print DTCs and freeze frame data if necessary.
| |||||
| 5.CLEAR DTC AND FREEZE FRAME DATA* |
Clear DTCs and freeze frame data (Click here).
| |||||
| 6.VISUAL INSPECTION |
| |||||
| 7.CONFIRM PROBLEM SYMPTOMS |
- HINT:
- If the engine does not start, first perform the "Check DTC" and "Basic Inspection" procedures below.
| Result |
Proceed to |
| Malfunction occurs |
A |
| Malfunction does not occur |
B |
|
|||||
| |||||
| 8.CHECK DTC* |
- HINT:
- Refer to DTC Check / Clear (Click here).
| Result |
Proceed to |
| Trouble code |
A |
| No trouble code |
B |
|
|||||
| |||||
| 9.CONDUCT BASIC INSPECTION |
Conduct basic inspection (Click here).
| Result |
Proceed to |
| Malfunctioning parts not confirmed |
A |
| Malfunctioning parts confirmed |
B |
|
|||||
| |||||
| 10.REFER TO PROBLEM SYMPTOMS TABLE |
- HINT:
- Refer to Problem Symptoms Table (Click here).
- Also, refer to the inspection procedure for the problem symptom.
- Refer to Problem Symptoms Table (Click here).
| |||||
| 11.PARTS INSPECTION |
| |||||
| 12.IDENTIFY PROBLEM |
| |||||
| 13.ADJUST AND/OR REPAIR |
| |||||
| 14.CONFIRMATION TEST |
| |||||