2014 Hilux · Service Manual ENGINE

P0606 ECM / PCM Processor

Diagnostic trouble codes · Vehicles built Jun 2011 – Jul 2012

Also covers:

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
P0606
P0607
P1611
ECM internal error
(1 trip detection logic)
ECM

INSPECTION PROCEDURE

HINT:
Read freeze frame data using the intelligent tester. Freeze frame data record the engine condition when a malfunction is detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, and other data from the time the malfunction occurred.

NOTICE:
If the ECM is replacing, the new ECM needs initialization (Click here).


1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0606 OR P0607 OR P1611)

Result:
Display (DTC output)
Proceed to
P0606 or P0607 or P1611
A
P0606 or P0607 or P1611 and other DTCs
B



B
GO TO RELEVANT DTC CHART
A

REPLACE ECM


← P0560 System Voltage (from Aug 2014)P0607 Control Module Performance (+ P1611) (Aug 2012 – Jul 2013) →