CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Intelligent tester:
- Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect when the ECM is in check mode with the intelligent tester. In check mode, the ECM uses 1 trip detection logic, which has a higher sensitivity to malfunctions than normal mode (default), which uses 2 trip detection logic.
| Check for intermittent problems. |
Clear the DTCs (Click here).
Change the ECM from normal mode to check mode using the intelligent tester (Click here).
Perform a simulation test (Click here).
Check the connector and terminal (Click here).
Wiggle the harness and the connector (Click here).