2014 Hilux · Service Manual ENGINE

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014

HINT:
Intelligent tester:
Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect when the ECM is in check mode with the intelligent tester. In check mode, the ECM uses 1 trip detection logic, which has a higher sensitivity to malfunctions than normal mode (default), which uses 2 trip detection logic.


CHECK FOR INTERMITTENT PROBLEMS
  1. Clear the DTCs (Click here).

  2. Change the ECM from normal mode to check mode using the intelligent tester (Click here).

  3. Perform a simulation test (Click here).

  4. Check the connector and terminal (Click here).

  5. Wiggle the harness and the connector (Click here).

← CHECK FOR INTERMITTENT PROBLEMS (Aug 2012 – Jul 2013)CHECK FOR INTERMITTENT PROBLEMS (from Aug 2014) →