REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and seal.
| 3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() ![]() |
Remove the 2 bolts and disconnect the release cylinder assembly.
| 4. REMOVE STARTER ASSEMBLY |
Disconnect the starter connector.

Disconnect the terminal cap.
Remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.

