INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
INSTALL IGNITION SWITCH ASSEMBLY |
 |
- Install the switch to the steering column bracket upper with the 2 claws.
| 2.
CONNECT CONNECTOR |
 |
- Connect the 9 connectors as shown in the illustration.
Secure the wire harness with the clamps.
| 3.
INSTALL STEERING COLUMN COVER LOWER |
 |
- Install the cover lower with the 3 screws.
- HINT:
- Turn the steering wheel to the right and left as necessary to install the 3 screws and cover lower.
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 5.
PERFORM INITIALIZATION |
 |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.