2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL IGNITION SWITCH ASSEMBLY

  1. A099992E04
    Install the switch to the steering column bracket upper with the 2 claws.


2. CONNECT CONNECTOR

  1. G039728E01
    Connect the 9 connectors as shown in the illustration.

  1. Secure the wire harness with the clamps.


3. INSTALL STEERING COLUMN COVER LOWER

  1. G036625E01
    Install the cover lower with the 3 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to install the 3 screws and cover lower.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

← INSTALLATION (Aug 2012 – Jul 2013)PRECAUTION (from Jun 2011) →