2014 Hilux · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2013


1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY

D100424
  1. Install the clutch accumulator with the 3 bolts.

    Torque:
    12 N*m{ 120 kgf*cm , 9 ft.*lbf }

  1. D100423
    Using a union nut wrench, connect the 2 flexible tubes.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }

    NOTICE:
    Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).


2. BLEED AIR FROM CLUTCH PIPE LINE
(Click here)

3. CHECK FOR CLUTCH FLUID LEAKAGE

4. CHECK FOR FLUID LEVEL IN RESERVOIR

Fluid:
Made
Fluid
for TSAM Made
SAE J1704 or FMVSS No. 116 DOT 4
except TSAM Made
SAE J1703 or FMVSS No. 116 DOT 3

← REMOVAL (Jun 2011 – Jul 2013)COMPONENTS (from Jun 2011) →