REASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL TRANSMISSION SOLENOID ASSEMBLY |
![]() ![]() |
Coat a new O-ring with ATF and install it to the shift solenoid valve SL.
Install the shift solenoid valve SL with the bolt.
- Torque:
- 9.8 N*m{ 100 kgf*cm , 87 in.*lbf }
Coat 2 new O-rings with ATF and install them to the shift solenoid valve S1 and S2.
Install the shift solenoid valve S1 and S2 with the bolt.
- Torque:
- 6.6 N*m{ 67 kgf*cm , 56 in.*lbf }
Install the shift solenoid valve SLT with the plate and bolt.
- Torque:
- 6.4 N*m{ 65 kgf*cm , 56 in.*lbf }


