2014 Hilux · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE 2ND COAST BRAKE PISTON OIL SEAL RING

AT05418E01

2. REMOVE 2ND COAST BRAKE PISTON ROD

AT05260E01
  1. Firmly hold down the piston, and then compress the compression spring.

  1. Remove the E-ring.

  1. D001299E01
    Remove the spring, washer plate and piston rod.


3. INSPECT 2ND COAST BRAKE BAND

D025701E01

NOTICE:
  1. If the lining of the brake band is peeled off or discolored, or if any part of the printed numbers are damaged, replace the brake band.
  2. Before assembling the new band, soak it in ATF for at least 15 minutes.

← COMPONENTS (from Jun 2011)INSPECTION (from Jun 2011) →