DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
REMOVE 2ND COAST BRAKE PISTON OIL SEAL RING |
 |
| 2.
REMOVE 2ND COAST BRAKE PISTON ROD |
 |
Firmly hold down the piston, and then compress the compression spring.
Remove the E-ring.
- Remove the spring, washer plate and piston rod.
| 3.
INSPECT 2ND COAST BRAKE BAND
|
 |
- NOTICE:
- If the lining of the brake band is peeled off or discolored, or if any part of the printed numbers are damaged, replace the brake band.
- Before assembling a new band, soak it in ATF for at least 15 minutes.