REASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
INSTALL 2ND COAST BRAKE PISTON ROD |
 |
Check the piston rod length.
- HINT:
- There are 2 different standard lengths for the piston rod.
- Piston rod length:
Groove Number
|
Length
|
0
|
78.4 mm (3.087 in.)
|
1
|
79.9 mm (3.146 in.)
|
If the length is not as specified, replace the rod with a new one even if the brake band works normally.
- Install the washer plate, compression spring and piston to the piston rod.
- Firmly hold down the piston, and then compress the compression spring.
Install the E-ring.
| 2.
INSTALL 2ND COAST BRAKE PISTON OIL SEAL RING |
 |
Coat the oil seal ring with ATF.
Spread the ends of the ring to install the oil seal ring to the piston groove. Then squeeze its ends together.
- NOTICE:
- Do not expand the ring ends excessively.