2014 Hilux · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. INSTALL 2ND BRAKE PISTON

AT08452E01
  1. Coat 2 new O-rings with ATF, and install them on the 2nd brake piston.

  1. Be careful not to damage the O-rings, and press the 2nd brake piston into the 2nd brake drum with both hands.


2. INSTALL 2ND BRAKE PISTON RETURN SPRING

AT08185E04
  1. Install the piston return spring.

  1. Install the spring retainer.

  1. AT08438E01
    Place SST on the spring retainer, and compress the return spring with a press.
    SST
    09350-30020   (09350-07040)

    NOTICE:
    1. Do not deform the spring sheet. Stop compressing when the spring sheet is lowered to 1 to 2 mm (0.039 to 0.078 in.) from the snap ring groove.
    2. Do not expand the snap ring excessively.

  1. Using a snap ring expander, install the snap ring.


3. INSPECT 2ND BRAKE PISTON

AT08439E01
  1. Make sure the 2nd brake piston moves smoothly when applying and releasing low-pressure compressed air to the 2nd brake drum.


4. INSTALL NO. 4 PLANETARY CARRIER THRUST WASHER

AT08184E01
  1. Coat the thrust washer with petroleum jelly, and install it.

    HINT:
    Make sure that the cutout portions of thrust washer fit into the teeth of the spring retainer.

← INSPECTION (from Jun 2011)COMPONENTS (from Jun 2011) →