INSTALLATION
Removal / installation · Vehicles built from Jun 2011
| 1.
INSTALL VEHICLE SPEED SENSOR |
 |
Coat a new O-ring with ATF and install it to the sensor.
- Install the sensor with the bolt.
-
Torque:
- 5.4 N*m{
5 kgf*cm
, 48 in.*lbf
}
Connect the sensor connector
| 2.
INSTALL SPEEDOMETER SENSOR |
 |
Coat a new O-ring with ATF and install it to the sensor.
- Install the speedometer driven gear to the sensor.
- HINT:
- Install the gear so that the gear's grooves align with the protrusions inside the sensor.
- Install the sensor assembly with the bolt.
-
Torque:
- 9.8 N*m{
99 kgf*cm
, 87 in.*lbf
}
Connect the sensor connector.