2014 Hilux · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Jun 2011


1. INSTALL O/D DIRECT CLUTCH SPEED SENSOR

G034531E01
  1. Coat a new O-ring with ATF and install it to the sensor.

  1. G034266E01
    Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.


2. INSTALL NO. 2 VEHICLE SPEED SENSOR

G034531E01
  1. Coat a new O-ring with ATF and install it to the sensor.

  1. C122052E01
    Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.


3. INSTALL SPEEDOMETER SENSOR

C122055E01
  1. Coat a new O-ring with ATF and install it to the sensor.

  1. C122054E04
    Install the speedometer driven gear to the sensor.

    HINT:
    Insert the gear so that the gear's grooves align with the protrusions inside the sensor.

  1. C122053E01
    Install the sensor assembly wit the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.

← INSPECTION (from Jun 2011)COMPONENTS (from Jun 2011) →